The Ford Barn - View Single Post

Wily Kyote · 09-10-2012, 12:53 AM

The elongated slot in the oil pump... I just removed an oil pump that had a round hole, instead. Were some of them round, or might this one be originally from a French motor? The head of the hold down bolt is metric measurement. As are the heads of the oil pan bolts.

09-10-2012, 12:53 AM	#17
Wily Kyote Member Join Date: Jul 2011 Posts: 60	Re: Walt Dupont lectures on V8 Oiling The elongated slot in the oil pump... I just removed an oil pump that had a round hole, instead. Were some of them round, or might this one be originally from a French motor? The head of the hold down bolt is metric measurement. As are the heads of the oil pan bolts.