The Ford Barn - View Single Post

JeffB2 · 09-03-2012, 02:53 AM

No problem fitting the AOD,I have a 302 and AOD in my '54 Customline no mods needed it will sit right on the stock trans crossmember use an ANCHOR 2253 mount about $10 at Autozone.Be sure and get the Lokar T.V. cable real easy to use.You will need a 164 tooth flexplate with a 28 oz. balance for the AOD give these guys a call http://www.kmjent.com/ prices are good.AOD's from 1980-93 are non computer the best donors are 1988-93's with the improved lube mods and valve body.

09-03-2012, 02:53 AM	#4
JeffB2 Senior Member Join Date: May 2010 Location: Phoenix,AZ Posts: 1,418	Re: 55 ford engine and trans No problem fitting the AOD,I have a 302 and AOD in my '54 Customline no mods needed it will sit right on the stock trans crossmember use an ANCHOR 2253 mount about $10 at Autozone.Be sure and get the Lokar T.V. cable real easy to use.You will need a 164 tooth flexplate with a 28 oz. balance for the AOD give these guys a call http://www.kmjent.com/ prices are good.AOD's from 1980-93 are non computer the best donors are 1988-93's with the improved lube mods and valve body.