The Ford Barn - View Single Post

HOTRODPRIMER · 08-30-2012, 08:05 AM

I assume,you are talking about a truck shell and you are referring to the metal piece that is made to the back side of the insert if it is a truck shell.

I suspect you will need to fabricate the replacement piece.

There is a lot of difference between a passenger car shell and a truck shell. HRP

08-30-2012, 08:05 AM	#5
HOTRODPRIMER Senior Member Join Date: May 2010 Location: Upstate,South Carolina Posts: 512	Re: 32 grill shield ? I assume,you are talking about a truck shell and you are referring to the metal piece that is made to the back side of the insert if it is a truck shell. I suspect you will need to fabricate the replacement piece. There is a lot of difference between a passenger car shell and a truck shell. HRP __________________ ‘When one door closes, another opens. But we often look so regretfully upon the closed door that we don’t see the one which has opened for us.’ Alexander Graham Bell Last edited by HOTRODPRIMER; 08-30-2012 at 08:39 AM.