The Ford Barn - View Single Post

Brentwood Bob · 08-23-2012, 11:13 AM

The exposed threads are fragile. Best solution I have heard of is to take a bolt that will fit into the shaft. Releave the nut on a lathe so a pocket is created to shield the exposed fragile threads of the shaft. Then support the steering wheel and tap the bolt head with a bfh. Bob

08-23-2012, 11:13 AM	#5
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,502	Re: Steering Wheel Puller The exposed threads are fragile. Best solution I have heard of is to take a bolt that will fit into the shaft. Releave the nut on a lathe so a pocket is created to shield the exposed fragile threads of the shaft. Then support the steering wheel and tap the bolt head with a bfh. Bob