Re: spray cans
Rustoleum works good but takes forever to dry. For those not going for points, the Rustoleum professional stainless will give you a Cad plate look. You also want the gloss and semi gloss blacks.
Some of the cheap new enamels suck. They go on like water and do not stick to pointy areas. Not worth bothering with at all.
Been doing a lot of small parts with powder coat. Something to look into if you are starting a restoration and have lots of parts to do. Paying extra for Tiger-Drylac is worth every penny as it works much better then the lower cost stuff I have used. I made a oven from the trash larger by adding a metal box off the back and insulating it with fiberglass insulation. Did my wheels with it.
|