The Ford Barn - View Single Post

Russ/40 · 05-11-2010, 10:54 AM

If the new race can be inserted by hand fit, the prior race has spun. Use Loctite when inserting the race to prevent any movement. Use the "worn parts" loctite in the silver tube.

05-11-2010, 10:54 AM	#4
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Fitting New Front Hub Bearings If the new race can be inserted by hand fit, the prior race has spun. Use Loctite when inserting the race to prevent any movement. Use the "worn parts" loctite in the silver tube.