The Ford Barn - View Single Post - c-4 to an FE block

Y-Blockhead · 06-18-2012, 04:48 PM

I would also recommend a 'C Code' servo and Boost valve kit. And consider a deeper pan and good cooler if using behind the FE.

06-18-2012, 04:48 PM	#23
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 7,293	Re: c-4 to an FE block I would also recommend a 'C Code' servo and Boost valve kit. And consider a deeper pan and good cooler if using behind the FE. Last edited by Y-Blockhead; 06-18-2012 at 05:05 PM.