View Single Post
Old 06-17-2012, 07:01 PM   #19
Milt/Las Vegas
Senior Member
 
Milt/Las Vegas's Avatar
 
Join Date: May 2010
Location: North Las Vegas,Nv/Rainier,Or
Posts: 450
Default Re: c-4 to an FE block

Quote:
Originally Posted by Y-Blockhead View Post
Milt, have you seen this electronic kit on e-bay. Looks pretty compact. http://bit.ly/K59Rdw
If you don't mind me asking, how much did you pay for your adapter from Gear Vendors. looks like I am going have to "step up to the plate" also.

Right now with 27" tall tires and 3.55's it turning 3100 RPM at 70 MPH (calculated, not actual. I don't trust my speedo to be accurate). With the GV it should be ~2400RPM, much better for highway speeds.

Good to talk to someone that actually has a GV O/D.
Thanks, Dennis
Dennis,I'll check out the kit thanks.It seems like it was about $600,but that was quite a few years ago.
__________________
Milt/Las Vegas
Milt/Las Vegas is offline   Reply With Quote