The Ford Barn - View Single Post

Russell in Tulsa · 05-10-2010, 09:50 PM

Welcome, The oil will look brand new as all of the dirt has settled out and is setting in the bottom of the pan and the valve chamber. Do as Tom suggested and clean it up before actually starting it. You'll need to order the gaskets for reassembly and use lots of penetrating oil on the nuts and bolts to avoid surprises.

05-10-2010, 09:50 PM	#68
Russell in Tulsa Senior Member Join Date: May 2010 Location: Tulsa Oklahoma Posts: 298	Re: Hello all, new to the forum! Welcome, The oil will look brand new as all of the dirt has settled out and is setting in the bottom of the pan and the valve chamber. Do as Tom suggested and clean it up before actually starting it. You'll need to order the gaskets for reassembly and use lots of penetrating oil on the nuts and bolts to avoid surprises.