Quote:
Originally Posted by greyhound
32 B-model; Need source for a prebent fuel line from the fuel pump to the tillotson carb. Thanks in advance.
|
Does the fuel line on your Tillotson enter the carb from the front (Model B) or the side (Model A). If it enteres from the front a line prebent for a Model B would require additional bending and might be too short. If this is the case, the fuel line from the tank to the carb on a Model A might be a good place to start for tubing to cut and bend. Also since you have a Tillotson you are obviously not trying for a high point car and I would like to mention this location is a good place to install an inline fuel filter.
Charlie Stephens