The Ford Barn - View Single Post

Rowdy · 05-10-2010, 08:03 PM

Likely the waterpump is stiff to the point on being on the edge of seizing up. Might want to take it off and see what that might need for rebuild parts ar atleast a good cleaning. The dront bearing can be greased with regular grease, but the back bushing requires waterpump grease. Don't forget the funny looking nut on the back bushing is a packing nut and has a packing inside. Rod

05-10-2010, 08:03 PM	#57
Rowdy BANNED Join Date: May 2010 Location: Gothenburg Nebraska Just off I-80 Posts: 4,893	Re: Hello all, new to the forum! Likely the waterpump is stiff to the point on being on the edge of seizing up. Might want to take it off and see what that might need for rebuild parts ar atleast a good cleaning. The dront bearing can be greased with regular grease, but the back bushing requires waterpump grease. Don't forget the funny looking nut on the back bushing is a packing nut and has a packing inside. Rod __________________ Do the RIGHT thing - Support the H.A.M.B. Alliance!!!!