The Ford Barn - View Single Post

J Franklin · 07-07-2010, 07:05 PM

On my rebuilt engine the valves were a bit sticky so I added Marvel Mystery Oil in the tank and ran some straight through the intake manifold wiper fitting. I had to do this 2 or 3 times on different days but after that nothing is sticking now. Good luck on the rest of your restoration.

07-07-2010, 07:05 PM	#2
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 6,586	Re: Update On My Valve Sticking Motor On my rebuilt engine the valves were a bit sticky so I added Marvel Mystery Oil in the tank and ran some straight through the intake manifold wiper fitting. I had to do this 2 or 3 times on different days but after that nothing is sticking now. Good luck on the rest of your restoration.