The Ford Barn - View Single Post

Maclab58 · 04-09-2012, 04:11 PM

Sorry, but no. I redid the rear on my 31 slant window a few months ago then detonated the ring and pinion gear on my 28 sport coupe a few weeks ago. I'm in the putting back together mode now with new seals, races, bearings and of course ring and pinion gears. The seals are easy to put in. U just have to tear the rearend completely down. Tom Endy has a great tech article on the Orange County Model A club website. Print it out and follow the directions. It's not that hard, just time consuming. Good Luck!

04-09-2012, 04:11 PM	#2
Maclab58 Senior Member Join Date: Jul 2010 Location: Wichita Falls, Texas Posts: 983	Re: Rear axle seal, 1930 Sorry, but no. I redid the rear on my 31 slant window a few months ago then detonated the ring and pinion gear on my 28 sport coupe a few weeks ago. I'm in the putting back together mode now with new seals, races, bearings and of course ring and pinion gears. The seals are easy to put in. U just have to tear the rearend completely down. Tom Endy has a great tech article on the Orange County Model A club website. Print it out and follow the directions. It's not that hard, just time consuming. Good Luck!