The Ford Barn - View Single Post

meskhov · 04-09-2012, 11:24 AM

First I would like to say thanks to most that replied.
George, you are correct indeed about the 1.5 x thread diameter for depth as that is in the Machinists handbook.
Let me also state to James that I'm very upset and insulted that you call me a hit and run poster. I am merely posting facts about my findings with a new product that has viable issues that should have been corrected years ago. I had company come from out of state this past holiday weekend and had better things to do then argue with you.
I am merely advising my fellow Model A members so they know of an option to correct the wrong thickness of the new Snyder 5.5 head so that the nuts will be flush, that's all. If you don't want to use or believe the findings then that is your decision but don't go slamming new members that are here to learn and help others in this hobby!
I rest my case.

04-09-2012, 11:24 AM	#60
meskhov Member Join Date: Oct 2011 Posts: 37	Re: Snyder's Head Problem First I would like to say thanks to most that replied. George, you are correct indeed about the 1.5 x thread diameter for depth as that is in the Machinists handbook. Let me also state to James that I'm very upset and insulted that you call me a hit and run poster. I am merely posting facts about my findings with a new product that has viable issues that should have been corrected years ago. I had company come from out of state this past holiday weekend and had better things to do then argue with you. I am merely advising my fellow Model A members so they know of an option to correct the wrong thickness of the new Snyder 5.5 head so that the nuts will be flush, that's all. If you don't want to use or believe the findings then that is your decision but don't go slamming new members that are here to learn and help others in this hobby! I rest my case.