The Ford Barn - View Single Post

Karl Wolf · 04-01-2012, 03:31 PM

I like brazing, don't realy trust epoxy... Don't pin it- it's too thin, no support- and too long...
Grind a ditch to lay brazing in...
I would bolt the two heads together and put them in the bbq @ 400 degrees or so...

But it might be easier to find another head...

Karl

04-01-2012, 03:31 PM	#2
Karl Wolf Senior Member Join Date: May 2010 Location: Mill Valley,Ca. Posts: 1,555	Re: Cracked EAB head, what to do. I like brazing, don't realy trust epoxy... Don't pin it- it's too thin, no support- and too long... Grind a ditch to lay brazing in... I would bolt the two heads together and put them in the bbq @ 400 degrees or so... But it might be easier to find another head... Karl