The Ford Barn - View Single Post

Barry B./ Ma. · 03-18-2012, 03:53 PM

Pull the contact strip away from the plug by about 1/8 inch then start the engine. You should see the spark jump across. If no spark I would suspect the distributor body.

03-18-2012, 03:53 PM	#9
Barry B./ Ma. Senior Member Join Date: May 2010 Location: Southbridge, Ma. Posts: 1,614	Re: No fire to #1 plug Pull the contact strip away from the plug by about 1/8 inch then start the engine. You should see the spark jump across. If no spark I would suspect the distributor body.