Re: Disrtibutor problems
Sponsored Links (Register now to hide all advertisements)
Common problem: armored cable screwed too far into distribbutor, shorting out to main connector strap. They always look screwed out too far when correct. Usually screwed in by only 2 or 3 threads.
just screw it out a little at a time and it might run.
Bill W. (Please let us know, so we can see if we know our s**t or not, so we can help others. Bill W.
__________________
"THE ASSISTANT GURU OF STUFF"
Last edited by BILL WILLIAMSON; 03-03-2012 at 09:59 PM.
|