The Ford Barn - View Single Post - Rebuilt Generator installed: Higher the RPM the more discharge

Chris H · 02-27-2012, 09:26 PM

See Brattons latest catalog, pg 92, for wiring diagram. One of the two wires should be the yellow/black which runs in the harness back to the driver's side of the junction box. There will also be a wire to the horn and maybe the lighting harness (?) I think. They should all be attached to the pully side of the cut out as shown in Theo's photos above. Hope this helps.

02-27-2012, 09:26 PM	#34
Chris H Senior Member Join Date: Oct 2011 Location: Wood River, IL Posts: 119	Re: Rebuilt Generator installed: Higher the RPM the more discharge See Brattons latest catalog, pg 92, for wiring diagram. One of the two wires should be the yellow/black which runs in the harness back to the driver's side of the junction box. There will also be a wire to the horn and maybe the lighting harness (?) I think. They should all be attached to the pully side of the cut out as shown in Theo's photos above. Hope this helps.