View Single Post
Old 02-27-2012, 05:52 PM   #8
dewickt
Junior Member
 
dewickt's Avatar
 
Join Date: May 2010
Location: Knoxville, TN
Posts: 24
Default Re: Block water leak

Exhaust manifold bolts go into the water jacket, a loose bolt can leak. When I went to pull my manifolds I took the head off of one on each side, was able to pull them then took a torch to the remainders of the bolts, was able to screw the remains out with a pair of vice grips after heating. The remains of the bolts were well rusted from the water immersion.
__________________
Terry
dewickt is offline   Reply With Quote