The Ford Barn - View Single Post

Tom Endy · 06-30-2010, 01:06 AM

Contact Jim Nichols at Jim's Automotive Services in Costa Mesa, CA 714-546-2969. He can repair the shaft for you. He turns the pilot end down on a lathe then interference press fits a sleeve on that will be a nice slide fit into the pilot bearing. His price is very reasonable. He has done countless numbers of them.

Tom Endy

06-30-2010, 01:06 AM	#5
Tom Endy Senior Member Join Date: May 2010 Location: Southern California Posts: 3,136	Re: Transmission main drive gear Contact Jim Nichols at Jim's Automotive Services in Costa Mesa, CA 714-546-2969. He can repair the shaft for you. He turns the pilot end down on a lathe then interference press fits a sleeve on that will be a nice slide fit into the pilot bearing. His price is very reasonable. He has done countless numbers of them. Tom Endy