The Ford Barn - View Single Post - 1940 Convertible Windshield Garnish Moldings & Rear Seat

barryfromvictoria · 02-06-2012, 03:38 AM

the closed car moldings are different on the ends that go to the center. the countersunk screw hole spacing is different. the radius at the bottom is different. the height is about 1/2" higher than the conv. the center molding is completely different. station wagons are same as conv.

02-06-2012, 03:38 AM	#5
barryfromvictoria Senior Member Join Date: May 2010 Posts: 220	Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat the closed car moldings are different on the ends that go to the center. the countersunk screw hole spacing is different. the radius at the bottom is different. the height is about 1/2" higher than the conv. the center molding is completely different. station wagons are same as conv.