The Ford Barn - View Single Post

DBF 30 · 02-06-2012, 03:25 AM

Thanks to everyone for the replies and all the great advice. I will use JB Weld to fix the crack. If the bearings check out ok, I will try to do the repair with the engine still in the car. Should be interesting trying to prep and glue upside down but I'm sure that not a lot of material will be required to get a good seal. Besides nobody will be able to see it at that location anyway. I will post again and let you know how it turns out.

Thanks again for the help.

02-06-2012, 03:25 AM	#18
DBF 30 Member Join Date: Dec 2011 Location: Kansas City, Missouri Posts: 38	Re: Need advice on cracked block Thanks to everyone for the replies and all the great advice. I will use JB Weld to fix the crack. If the bearings check out ok, I will try to do the repair with the engine still in the car. Should be interesting trying to prep and glue upside down but I'm sure that not a lot of material will be required to get a good seal. Besides nobody will be able to see it at that location anyway. I will post again and let you know how it turns out. Thanks again for the help.