Quote:
Originally Posted by CT AV8
Thanks, Walt. The radiator is in the stock location and we can run the hood. In fact, the rad is the original with new outlets at the top and an additional lower on the passenger side. Driver side lower aligns exactly with the truck type pump on the 8BA. We did have to trim the very bottom of the firewall a bit and had to rotate the fuel pump to clear. It is a pretty tight fit. This is an early pic when we were doing the fitment.
Attachment 68916 |
Nice installation. What is the distance from the centerline of the radiator mount hole to the centerline of the front motor mount hole? It will save me a little time on my A-V8 if you can give me this dimension. I am just now fitting the engine into the frame.