View Single Post
Old 06-24-2010, 12:38 PM   #1
bbhimself
Junior Member
 
Join Date: May 2010
Posts: 4
Default wiring re: coil (6V)

Need to replace this coil which is remoted from the distributor. On top the old coil has 2 posts, one says "Dist." and the other says, "Batt."; however in following the wires the one that says "Dist." is wired to the battery( 1940 Ford DeLuxe Conv., neg. ground) and the one that says "Batt." is wired to the distributor. A further complication occurs inasmuch the new coil on the top has only + and - markings to identify it. For any help- much thanks.
bbhimself is offline   Reply With Quote