[JM 35 Sedan]

I recently removed the windshield in my '35 to install a new Drake rubber gasket. I had to remove those six slotted pan head screws w/fiber washers to allow removal of a defective windshield wind out mechanism and replace it with a new mechanism from Drake. I believe I took some pictures that will show those six screws. I will post here if I can find them or I could take more pictures and post them. I believe the nuts attached to the back of the dash are captive 'D' shaped nuts that can be purchased new from various suppliers including Roy Nacewicz. The dash definitely does not hang over the body but does butt against it. There is also a peice of what looks like fender welting between the dash and the body on each side of the windshield winding mechanism. Maybe my pictures will also show this.