The Ford Barn - View Single Post - Carb Re-Building Question

LOWRIDER · 10-26-2011, 06:14 AM

I'm with KenCt on this one with trying to knock it out by slamming down on a piece of wood. Used to work on getting out small valves on A/T valve bodies. Like your mother said "Be careful or you'll put your eye out"

10-26-2011, 06:14 AM	#7
LOWRIDER Senior Member Join Date: May 2010 Location: Kingman Az. 86409 Posts: 425	Re: Carb Re-Building Question I'm with KenCt on this one with trying to knock it out by slamming down on a piece of wood. Used to work on getting out small valves on A/T valve bodies. Like your mother said "Be careful or you'll put your eye out"