The Ford Barn - View Single Post

jojofilo88 · 09-29-2011, 05:56 PM

its actually very easy with the ford tool. just did it last weekend on mine and it takes about 5 minutes..take off the center dash panel with the four screws and the wiring behind if you need to. make sure there not much gas in the tank and then use the tool. the whole gauge comes out and you change the float. the put it back together. very simple

09-29-2011, 05:56 PM	#7
jojofilo88 Member Join Date: Sep 2011 Location: Connecticut Posts: 48	Re: Fuel gauge float question its actually very easy with the ford tool. just did it last weekend on mine and it takes about 5 minutes..take off the center dash panel with the four screws and the wiring behind if you need to. make sure there not much gas in the tank and then use the tool. the whole gauge comes out and you change the float. the put it back together. very simple