The Ford Barn - View Single Post

old Tom · 05-09-2010, 11:59 AM

Is it possible to bore a 59AB block out to the water jackets,install sleeves and than rebore to 3 7 /16 or even 3 1/2. If that was coupled with a 4 1/2 crank you would come up with some ci that shouldproduce quite a bit of HP.

05-09-2010, 11:59 AM	#1
old Tom Senior Member Join Date: May 2010 Posts: 201	59AB block Is it possible to bore a 59AB block out to the water jackets,install sleeves and than rebore to 3 7 /16 or even 3 1/2. If that was coupled with a 4 1/2 crank you would come up with some ci that shouldproduce quite a bit of HP.