View Single Post
Old 08-18-2011, 01:43 PM   #7
Barry B./ Ma.
Senior Member
 
Barry B./ Ma.'s Avatar
 
Join Date: May 2010
Location: Southbridge, Ma.
Posts: 1,614
Default Re: Shortend Pitman Arm

I makes it easier both stopped and rolling but increases the number of turns, not noticeably. I would say it makes it easier by around 20%. Some people say it's a longer turning radius but I don't notice it being different. I would recommend a new shorter arm instead of a welded unit.
Barry B./ Ma. is offline   Reply With Quote