The Ford Barn - View Single Post

Barlea · 06-08-2010, 10:58 PM

Bend the hose in the middle so the bottom of the "V" is down and push the hose down between the rad outlet and engine inlet, when bottom of open end of hose passes bottom of open end of rad outlet and other end of hose passes open end of engine inlet, pull/push gently up on the bottom of the hose and it will pass over the open top of rad outlet/engine inlet. But now you have to open the hose clamps to install them. ..B.

06-08-2010, 10:58 PM	#2
Barlea Senior Member Join Date: May 2010 Location: West Central Alberta Posts: 441	Re: lower radiator hoses Bend the hose in the middle so the bottom of the "V" is down and push the hose down between the rad outlet and engine inlet, when bottom of open end of hose passes bottom of open end of rad outlet and other end of hose passes open end of engine inlet, pull/push gently up on the bottom of the hose and it will pass over the open top of rad outlet/engine inlet. But now you have to open the hose clamps to install them. ..B.