The Ford Barn - View Single Post

MN Stumpjumper · 08-01-2011, 04:53 AM

Finally getting around to updating you on my overheating problem. I found an original radiator cap to replace the "new one" which didn't seal the lower surface in the radiator neck.
I installed thermostats in the heads.
I have idled , driven hard, and normal. NO overheating issues at all.
Thanks to everyone who responded with advice.

08-01-2011, 04:53 AM	#18
MN Stumpjumper Senior Member Join Date: May 2010 Posts: 203	Re: Flathead cooling advice wanted Finally getting around to updating you on my overheating problem. I found an original radiator cap to replace the "new one" which didn't seal the lower surface in the radiator neck. I installed thermostats in the heads. I have idled , driven hard, and normal. NO overheating issues at all. Thanks to everyone who responded with advice.