Quote:
Originally Posted by ling102
The car is new purchase for me.
How can I tell if the distriubutor is a Loadomatic?
Does anyone make an aftermarket ready to run distributor?
I will get the information off of the carburator, but I have to remove it first, as the carburator was installed backwards.
Thanks again guys.
|
You can take a cell photo of the carb. Should be a list number on the horn. A photo of the distributor would also help. There are converted SB Chevy distributors that will work with a flathead as mentioned above. These have vacuum advance not the Load-o-matic system.