Quote:
Originally Posted by Cptkoberg
I ran into the same problem as 32phil. I think we are going to machine off a few mm of the TO carrier so the PP fingers will only make contact with the bearing. McLeod said they do not have a bearing large enough for the ford carrier. Any other ideas would be appreciated.
Attachment 585957
Attachment 585958
Attachment 585959 |
I'm not sure what you are speaking about as far as machining goes? From what I see, it is the FACE of the TO bearing that is hitting the fingers PAST the tips - which is incorrect. I don't see any way to fix this - given the shape of the 'fingers'?