The Ford Barn - View Single Post - !934 Ford Heavy Truck Steering Box/column Question

big deuce · 05-07-2026, 10:13 PM

I have some steering gear/box parts... the car/truck steeing gear uses a 1.125 diameter sector shaft, and I also have a sector housing for a BB truck that has a bore of 1.250 for the sector shaft. Hard to impossible to find rebuild sector and worm gears for the BB box. I do believe the column drop was the same as '32 pass. Ratio on the BB might be 17:1, cars were 13:1 for 1932, and 15:1 for 33-34.

05-07-2026, 10:13 PM	#2
big deuce Senior Member Join Date: May 2010 Location: Kansas Posts: 734	Re: !934 Ford Heavy Truck Steering Box/column Question I have some steering gear/box parts... the car/truck steeing gear uses a 1.125 diameter sector shaft, and I also have a sector housing for a BB truck that has a bore of 1.250 for the sector shaft. Hard to impossible to find rebuild sector and worm gears for the BB box. I do believe the column drop was the same as '32 pass. Ratio on the BB might be 17:1, cars were 13:1 for 1932, and 15:1 for 33-34.