Re: New 5.5:1 Cylinder Head Availability
Quote:
Originally Posted by nkaminar
B Butturff, To tell what kind of bearing you have without opening up the engine, you can use a bore scope and insert it into the hole after you take the breather tube out. The poured bearing at the rear has a large poured flange at the forward end that is used as a thrust bearing.
|
Neil, thanks for this tip! I've never read or heard of this before and will do it very soon.
__________________
_______________________
The other Bruce in Minnesota
1931 Model A Closed Cab (Budd) Pickup "Aurora"
Model A Ford Club of America
Lady Slipper A's
"You can't go back and change the beginning,
but you can start where you are and change
the ending." - C.S. Lewis
|