The Ford Barn - View Single Post

katy · 05-02-2026, 10:57 AM

Suggest you check the size of the ratchet nut before purchasing or fabricating one of the offset wrenches. Standard (stock) size is 1&3/8", but it's possible the nut has been replaced w/a different size, some variations are 1&5/16" and 1&1/4".

05-02-2026, 10:57 AM	#5
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 6,076	Re: Modified Engine Crank Suggest you check the size of the ratchet nut before purchasing or fabricating one of the offset wrenches. Standard (stock) size is 1&3/8", but it's possible the nut has been replaced w/a different size, some variations are 1&5/16" and 1&1/4". __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!