The Ford Barn - View Single Post - Cast aluminum or pot metal cowl light arms

Fred A · 06-08-2010, 09:28 AM

[QUOTE=Art Bjornestad;22901]There was a guy named Sheldon Greenland that reproduced lots of accessories back in the '60s.

I bought some parts from Sheldon Greenland in'65. He was well known for Moto Meters, Quails, and tail lights for the A. Worked out of his garage in a nice part of Pasadena. Still have some of his product, but just one of his brass cowl light arms. Sometimes at the bigger A events, the brass is seen peeking through worn chrome on his old arms, still in use. Good Luck: Fred A

06-08-2010, 09:28 AM	#7
Fred A Senior Member Join Date: May 2010 Location: Encino California, near Burbank Posts: 945	Re: Cast aluminum or pot metal cowl light arms [QUOTE=Art Bjornestad;22901]There was a guy named Sheldon Greenland that reproduced lots of accessories back in the '60s. I bought some parts from Sheldon Greenland in'65. He was well known for Moto Meters, Quails, and tail lights for the A. Worked out of his garage in a nice part of Pasadena. Still have some of his product, but just one of his brass cowl light arms. Sometimes at the bigger A events, the brass is seen peeking through worn chrome on his old arms, still in use. Good Luck: Fred A