The Ford Barn - View Single Post

rockfla · 04-17-2026, 10:27 AM

OR

Take some from the middle and re-weld them!!!

AS a side note, I just bought a set from Speedway motors. They measure "about" 32-1/4" (32-1/2 maybe) long BUT the threads on the radiator end of them is like 2/3" in length so plenty there to trim off and still have what I needed for my 33. Not sure IF they are the same as Drakes were BUT......Until I can find some originals!!! They had black OR SS/chrome

04-17-2026, 10:27 AM	#4
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 5,164	Re: Radiator support rods OR Take some from the middle and re-weld them!!! AS a side note, I just bought a set from Speedway motors. They measure "about" 32-1/4" (32-1/2 maybe) long BUT the threads on the radiator end of them is like 2/3" in length so plenty there to trim off and still have what I needed for my 33. Not sure IF they are the same as Drakes were BUT......Until I can find some originals!!! They had black OR SS/chrome Last edited by rockfla; 04-17-2026 at 10:33 AM.