The Ford Barn - View Single Post

fredM · 04-10-2026, 05:57 AM

what I did with my pipe was hack saw it in 2, not in the middle but more on the driver's side. then piece flexible tube over as much of the crossover as possible (clamp each end.) The gaskets are at Oreilly's, and some of that exhaust tape and putty will finish the job. In all honestly, I would buy a new or good used one but can't find one. P.S. remove the under plate for the cut, then put back plate.

04-10-2026, 05:57 AM	#2
fredM Member Join Date: Apr 2025 Posts: 58	Re: 8BA Crossover pipe what I did with my pipe was hack saw it in 2, not in the middle but more on the driver's side. then piece flexible tube over as much of the crossover as possible (clamp each end.) The gaskets are at Oreilly's, and some of that exhaust tape and putty will finish the job. In all honestly, I would buy a new or good used one but can't find one. P.S. remove the under plate for the cut, then put back plate.