Quote:
Originally Posted by glennpm
Looks like a 32 frame to me.
The photo is not close enough for me to see what is going on with their floor to frame detail. Their floor could have worked if the body was placed correctly. Since they didn’t, I don’t see how you could fix it without cutting weld or spot welds. With that much effort, I would replace the floor with a correct reproduction as I mentioned above.
|
I think you’re right glennpm.
Looking at the reportage, they put a support between the frame and the bottom of the quarterpannel. This one measure 3 1/2 in.
On my car, I have 4 1/2.
In the inside of the trunk, this shape shoudn’t be seeable.
On mine, we can see the top of it.
The whole body must go down on the floor.
Thank you everyone for your help. We’ve covered all the bases.