Re: Can't Get Hub On
Quote:
|
nkaminar: I'll try gringing off the adjustment arms. Sunny: the rods are all disconnected. The drum goes about half way across the shoes then stops. I tried turning in the adjusters till they stopped then backed them off all the way but still too tight. I tried tightening the axel bolt all the way in. It went in all the way but very tight.
|
Gotcha, if the drum went on halfway fine then stopped, that sounds like the emergency brake band hitting the drum and not going into the inner drum surface. if you can, as a test remove the band and try it again. if it goes on easy, then you found the problem.
__________________
"Ain't but three thangs in this world worth a solitary dime, but A Models, Sweet Tea, and Macaroni Pie!"
|