Re: Can't Get Hub On
Try grinding about a mm off the ends of the adjustment arms, the rods that go from the brake shows and into the adjuster assy. Maintain the same angle and rounding at the point. Also try sanding or grinding a little of the material off the lining of the shoes. It looks like they may be rubbing at the trailing edges which can be cause by the shoes not being perfectly centered.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|