The Ford Barn - View Single Post - 1940 Ford trunk lid lock cylinder fitment issue

Ken/Alabama · 03-29-2026, 05:37 PM

It should work without grinding that pin down. The overall length from the key hole to the end of the small pin should measure 1 5/16”. If it’s longer then it’s for a later car.

03-29-2026, 05:37 PM	#3
Ken/Alabama Senior Member Join Date: May 2010 Location: Alabama Posts: 3,455	Re: 1940 Ford trunk lid lock cylinder fitment issue It should work without grinding that pin down. The overall length from the key hole to the end of the small pin should measure 1 5/16”. If it’s longer then it’s for a later car.