The Ford Barn - View Single Post - Stock coil with a Vintage Mallory distributor

Bored&Stroked · 03-22-2026, 11:57 AM

It is never a bad idea to have your "new" vintage distributor ran up on a distributor machine - making sure the bushings are good, the advance curve is correct, points are good, etc.. Might save you some drama down the road!

03-22-2026, 11:57 AM	#4
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,910	Re: Stock coil with a Vintage Mallory distributor It is never a bad idea to have your "new" vintage distributor ran up on a distributor machine - making sure the bushings are good, the advance curve is correct, points are good, etc.. Might save you some drama down the road!