Quote:
Originally Posted by kevinshea
I use a 6v inline fuel pump/filter set up that is readily available in Ebay.. there is also a seller offering the same set up with a 1-5PSI regulator.. I use all NiCopper lines that are easily bendable and give them a wide radius as needed, Pump and filter are between rubber hoses making replacement pretty easy. I mount the pump on the frame rail just about under the drivers seat.
|
I bought an electric fuel pump and working on the installation. In your setup, do you leave the mechanical pump inline or did you remove it / or by pass it with the electric pump.
Scubaking also used an electric fuel pump but I don't know his set up left the mechanical pump in line with the electric fuel pump. He said he toggles the electric fuel pump on / off manually as needed if the engine sputters. So I am guessing he leaves the mechanical pump in line.