Quote:
Originally Posted by Sid
T I notice the piece on the wishbone ball is really hard like plastic. Isn't that supposed to be rubber?
|
Yes they are made of rubber. Tricks for putting on a new one:
- Lube the stall wishbone ball with silicone grease, window cleaner or dishwashing fluid
- Push on the new ball while applying air pressure to the small hole in the back which expand the ball and goes on easily.
- Heating the rubber ball up in water helps and may forgo the need for your air compressor
I've also put them on by turning them inside in a vise, use lube, push on it while turning it right side out. I use window cleaner and my sir compressor nozzle to take off and install motorcycle had grips too.