The Ford Barn - View Single Post

tubman · 02-13-2026, 02:29 PM

Removing the spring perch bolts is the real problem here. It has been approached on the H.A.M.B. several times. Check this out : https://www.jalopyjournal.com/forum/...4/#post-948132.

Some folks think it is better to pull them out : https://www.jalopyjournal.com/forum/.../#post-1548429.

There are a lot of threads over there on the subject. It might be worthwhile to spend some time going through them.

02-13-2026, 02:29 PM	#31
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 12,146	Re: 40 Ford drop axle Removing the spring perch bolts is the real problem here. It has been approached on the H.A.M.B. several times. Check this out : https://www.jalopyjournal.com/forum/...4/#post-948132. Some folks think it is better to pull them out : https://www.jalopyjournal.com/forum/.../#post-1548429. There are a lot of threads over there on the subject. It might be worthwhile to spend some time going through them. Last edited by tubman; 02-13-2026 at 02:38 PM.