Quote:
Originally Posted by Cptkoberg
I am looking for information on which diaphragm style pressure plate will bolt up to a 48 Merc fly wheel. It has the Six bolt holes that are 3 1/8” apart. I’ve been running this setup for quite some time but have been unable to locate any documents that will help and there is no identification data on my current plate.
Thanks for any help.
|
I know there are diaphragms that match the 3 1/8" Long style clutch bolt pattern on your Mercury flywheel. You can try NAPA that used to offer them, or clutch re-builders like Fort Wayne Clutch and South Bend Clutch, and the aftermarket like Centerforce, Mcleod, Ram etc. The other alternatives are having your flywheel drilled for a normal evenly spaced diaphragm bolt pattern or purchasing a new flywheel that has multi patterns pre-drilled.