Sponsored Links (Register now to hide all advertisements)
I think my book description is missing a description of the B-13031 clips. There are three of these clips connect to the back side if the reflector (48-13028) and are equally spaced around the inside perimeter of the reflector.
The three clips attached to the reflector align with three slots in the lip of the headlight bucket. The clips "snap" into place by aligning the slots and back side of the clips and pushing the reflector to the bucket.
The cork gasket fits in a grove on the front edge of the reflector and it's only function is to provide a weather tight seal between the glass and the reflector.