Re: Manifold Replacement
Quote:
Originally Posted by JayJay
More important is that you use the proper dome shaped washers between the nuts and the manifolds, and install them properly (concave side towards the block).
|
FWIW, the subject washers are made of spring steel, so don't go making your own out of normal flat washers.
Here's a sample: https://www.bokers.com/washers/custo...ville-washers/
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
Last edited by katy; 01-08-2026 at 10:42 AM.
Reason: Addition
|